Rottweiler Performance fuel dongles 690 2008-2020 & 701 2016-2020
DOES NOT WORK ON THE EU VERSION 2021+
For the EU-5 version (2021+) klik here
The Rottweiler Performance 'Fueling Dongles' are an effective and simple method to improving the fueling mixture of any fuel injected KTM by allowing the stock ECU to deliver a proper mixture at low to mid RPMs. By replacing the stock narrow band O2 plugs with these simple to install dongles, the Rottweiler Fueling Dongles feed the stock ECU a pre set signal that substantially smooths out the lower end power delivery reducing the jerky transition between the extremely lean low RPM mapping and the open loop upper end mapping. Overall average air fuel ratios also tend to richen up by about .5 to 1 point as well allowing the user an inexpensive option to 'bump up' the richness of their fuel delivery if the cost of a Powercommander is not currently an option for them.
How do they work? It's actually quite simple. The stock ECU is set to lean out the fuel delivery to a very lean 14.7 air fuel ratio (AFR) under 5500 RPM and 20% throttle. Once the engine has reached a sufficient warm up the ECU 'listens' to the stock narrow band O2 sensors and looks for a particular signal to keep the bike in that lean condition. This causes heat issues from extremely hot header pipes, makes the motorcycle jerky at low RPMs and reduces power. The Rottweiler Fueling Dongles send a return signal to the stock ECU that keeps the low end fueling at a much better running 13.8 +/-. A mixture that translates into an overall better running motorcycle.
Note: When running our Rottweiler Fueling Dongles, you have the option to remove your stock O2 sensor from the exhaust header. You can plug it with our 12mm O2-plugs sold separately.
In stock
Op vooraad
Indoor houseplant
![](https://assets.jwwb.nl/assets/img/webshop/placeholders/plant-3.webp)
Indoor houseplant
This is an example product. It can't be used or ordered.
Husqvarna Oberon Clutch Slave Cylinder (CLU-1000)
Replaces (OEM Part) 75032061044, 59032061044, K26632061044, K79432061044 or 79432061044.
Oberon Performance koppelingswerkcilinder voor de husqvarna 701 supermoto/enduro/vitpilen /svartpilen van 2016 t/m 2024
ontworpen om de efficiëntie en het uiterlijk van de originele koppelingswerkcilinder te verbeteren.
Het ontwerp en de afdichting van de interne zuiger zijn drastisch verbeterd om lekken te voorkomen en zorgen voor een soepelere koppeling.
CNC gefreesd van T6 billet-legering voor lichtheid, sterkte en opvallende looks.
Alles wat je nodig hebt, zit in de kit inclusief volledige instructies en is klaar om te passen.
Onze zuigerafdichtingen zijn vervaardigd uit speciaal Viton-rubber dat is bevroren en vervolgens CNC gefreesd met een "U" -profiel dat specifiek voor hydraulisch gebruik is. Bovendien wordt de zuiger zelf geleid door onze unieke zuigergeleider om slijtage te voorkomen en de juiste uitlijning binnen de Slave eenheid, en dit geeft uiteindelijk een soepelere hefboomwerking en verlengt de levensduur van het product.
Fabrieksgarantie:
De slavecilinder van Oberon Performance wordt standaard geleverd met een levenslange (retour naar basis) garantie, inclusief onderdelen en arbeid. Eenheden die ouder zijn dan 12 maanden na de datum van aankoop kunnen worden geretourneerd voor een reparatie / vervanging op voorwaarde dat een lid van Oberon Performance is gecontacteerd voorafgaand aan de verzending, zodat uw gegevens correct kunnen worden vastgelegd en van een retournummer worden voorzien. Het niet verkrijgen van een retournummer maakt deze garantie ongeldig. Zorg er daarnaast voor dat het artikel op de juiste manier is verpakt om ervoor te zorgen dat er geen schade kan ontstaan. De verzendkosten voor de klant naar Oberon Performance komen voor rekening van de klant. Alle redelijke verzendkosten worden door Oberon terugbetaald in een echte garantieprobleem.
Oberon Performance behoudt zich het recht voor garantie te weigeren als het geretourneerde artikel duidelijk schade vertoont, anders dan natuurlijke slijtage. Uw wettelijke rechten worden niet beïnvloed. Bij elke unit wordt een nieuwe pakking meegeleverd en deze moet ook worden gebruikt als het origineel er bruikbaar uitziet.
op voorraad
Husqvarna oberon Clutch Slave Cylinder (CLU-1000)
Replaces (OEM Part) 75032061044, 59032061044, K26632061044, K79432061044 or 79432061044.
Oberon Performance clutch slave cylinder for Husky 701 supermoto /enduro /vitpilen /svartpilen 2016-2024.
Designed to improve the efficiency and looks of the original clutch slave cylinder.
The internal piston design and seal have been drastically enhanced to prevent leaks and leave a smoother clutch action.
CNC machined from T6 billet alloy for lightness, strength and eye-catching looks. Seven fantastic colours to choose from. Everything you need is included in the kit including full instructions and is ready to fit.
Our piston seals are manufactured from special Viton rubber which is frozen and then CNC machined with a 'U' profile which is specifically for hydraulic use, in addition the piston itself is guided by our unique piston guide to prevent wear and maintain correct alignment within the slave unit, and this ultimately gives a smoother lever action and prolongs product life.
Manufacturer's Warranty:
Oberon Performance's slave cylinder comes with a lifetime (return to base) warranty as standard - including parts and labour. Units older than 12 months from date of purchase can be returned for a repair/replacement provided a member of Oberon Performance has been contacted prior to shipping, so your details can be logged correctly and supplied with a returns number. Failure to obtain a returns number will invalidate this warranty. Additionally please ensure the item has been packaged adequately to ensure no damage can be incurred - shipping costs from the customer to Oberon Performance will be met by the customer. All reasonable shipping costs will be refunded by Oberon in a genuine warranty issue. Oberon Performance reserves the right to reject any warranty should the returned item clearly display evidence of damage, other than natural wear and tear. Your statutory rights are not affected.
Fluid (Use Husqvarna approved fluid only)
In stock
Let's face it, the 690 and 701 are great bikes, but the transmissions shift like garbage. The idea is that when you nudge the shifter it should actually go into the next gear. False neutrals in the upper gears and a generally notchy feel to them does't exactly inspire confidence either.
- Virtually eliminate missed shifts and false neutrals. Quicker shifts.
- The 690 has lazy shift action. Not what you want when Super Motard racing or jumping those doubles or splitting that lane.
- The stock shifting, on the KTM 690, can be sketchy under even recreational use.
- Some individual bikes, more than others, have a propensity for false neutrals and missed shifts in critical situations.
- Installation: About 1-2 hours - no case splitting required. The clutch basket doesn't even have to be removed
FITS:
- 2008-2021 KTM 690 Duke / R
- 2008-2021 KTM 690 Enduro / R
- 2008-2024 KTM 690 SMC-R
- 2016-2024 Husqvarna 701 Enduro
- 2016-2024 Husqvarna 701 Supermoto
- 2016- 2021 Husqvarna 701 Sitpilen
- 2016-2021 Husqvarna 701 Svartpilen
- Gasgas 700 sm/enduro 2022-2024
On stock
Op voorraad
The new improved shift star for the ktm 690 /husqvarna 701 (oem ktm)
replacement for nr 76834115001.
if your bike has the old shift star we recommend to change it with the new improved shift star.
Including bolt.
In stock
Indoor houseplant
![](https://assets.jwwb.nl/assets/img/webshop/placeholders/plant-3.webp)
Indoor houseplant
This is an example product. It can't be used or ordered.
Zeta Revolver Shift Lever
The Zeta Revolver Shift Lever features a forged aluminum arm for durability and a fold-away tip to lessen the chance of damage in a crash. The tip is eccentric, so rotating it gives the ability to raise or lower it, fore or aft, depending on your preference.
Features:
- Forged A2014 aluminum brake arm
- Black anodized finish with laser print logo
- Shift tip is made of CNC machined aluminum with anodized finish
- Fits the husqvarna 701 /supermoto/enduro/vitpilen 2016-2024
In stock
FORGED SHIFT LEVER
SPECIFICATIONS:
- Forged lever arm shift lever available from ZETA.
- Shift arm is made of A2014 forged aluminum for durability.
- Forged arm is black anodized finish.
- Foldable shift tip is made of CNC aluminum with knurled finish for better shift grip.
- Shift tip is color anodized with ZETA laser print logo.
Fits the husqvarna 701 supermoto/enduro/vitpilen 2016-2022
In stock
ZETA racing oil filler plug for the husqvarna 701 supermoto/enduro/vitpilen 2016-2024
In stock
Scar oil filler plug blue
Scar oil filler plug blue
Oil filler plug for the husqvarna 701 supermoto/Enduro/vitpilen 2016-2024
In stock